This page describes different network cards, and how to use them.

• Level One FNC-0101TX: 10/100Mbps PCI card
• Accton Technology Corporation SMC2-1211TX: 10/100Mbps PCI card

A other page of interest might be my page about setting network profiles in Gentoo.

Settings to enable support for the Realtek RTL-8139A chip in a 2.6.x kernel:

Device Drivers  --->
    Networking support  --->
        [*] Networking support
	[*] Network device support
              Ethernet (10 or 100Mbit)  --->
	          [*] Ethernet (10 or 100Mbit)
		  [*] EISA, VLB, PCI and on board controllers
		  <*>   RealTek RTL-8139 PCI Fast Ethernet Adapter support

The card is using a pretty standard Realtek RTL-8139A chip, which works fine with the RTL-8139 driver in the kernel.

Settings to enable support for the RTL-8139A chip in a 2.6.x kernel:

Device Drivers  --->
    Networking support  --->
        [*] Networking support
	[*] Network device support
	    Ethernet (10 or 100Mbit)  --->
	        [*] Ethernet (10 or 100Mbit)
		[*] EISA, VLB, PCI and on board controllers
		<*>   RealTek RTL-8139 PCI Fast Ethernet Adapter support